Los SSD NVMe (Non-Volatile Memory Express) son dispositivos de almacenamiento flash de alto rendimiento que superan a los SSD en las cargas de trabajo mas exigentes, diseñados para sistemas de servidor y para clientes o empresas que utilizan la tecnología SSD. Fueron desarrolladas para reducir la latencia y proporcionar un acceso a disco más rápido.

Los usuarios podrán beneficiarse de:
– Muy baja latencia, habilitando el aumento de las operaciones de input/output por segundo (IOPS)
– Mayor ancho de banda, 4GB/s en la actual version del PCI-E 3.0 frente a 1,5GB/s del SAS3.
– Menor consumo de energía.
– RAID software, necesario para soluciones de almacenamiento Software Defined Storage (SDS).

Esto significa que podrán realizar más trabajo en menos tiempo que se traduce en menores costes y mayores ingresos. Por lo tanto, los beneficios de ROI para los usuarios de los servidores NVMe de Supermicro, son importantes e inmediatos.

Estas plataformas cubren las necesidades en materia de HPC, BBDD, Datacenter, diseño gráfico, HFT, SQL, motores de búsqueda, VDI, Almacenamiento Definido por Software, Cloud, Virtualización y entornos empresariales. Los servidores NVMe muestran claramente una ventaja de rendimiento sobre SAS SSD hasta 10 veces más en IOPS.

 

 

Beneficios de NVMe:

    • Ganancias de rendimiento grandes (6x)
    • Mejoras sustanciales de latencia (7x)
    • Backplane común soportando diferentes tipos de dispositivos NVMe, SAS, SATA
    • 2.5 “U.2 (SFF-8639) mejora la capacidad de servicio frente a las tarjetas Flash PCI-E (hot-swap)

Prestaciones NVMe VS SSD

  Medición NVMe SSD SATA3/SAS3 SSD Mejora

NVMe vs SSD

Bandwidth vs. SATA3 128K Sequential Read 2788.77 MB/s 470.60 MB/s 5.93x
128K Sequential Write 1838.98 MB/s 453.33 MB/s 4.06x
Bandwidth vs. SAS3 128K Sequential Read 2788.77 MB/s 980.34 MB/s 2.84x
128K Sequential Write 1838.98 MB/s 421.25 MB/s 4.37x
Latency vs. SATA3 4K Sequential Read 15.9 µs 47.3 µs 2.97x
4K Sequential Write 17.6 µs 51.4 µs 2.92x
Latency vs. SAS3 4K Sequential Read 15.9 µs 114.1 µs 7.18x
4K Sequential Write 17.6 µs 109.853 µs 6.24x

Características Destacadas


Titanium, 96% Efficiency
Power Supplies
10x 2.5″ NVMe support
24 DDR4 DIMM
2x 10GBase-T
 

SYS-1028U-TN10RT+

Virtualization Hosting, Cloud Computing, Data Center
• Dual Socket R3 (LGA 2011) support: Intel® Xeon® processor
E5-2600 v4/v3 family; QPI up to 9.6GT/s
• 10x 2.5″ Hot-swap bays; 6 NVMe + 4 NVMe/SAS3 Hybrid ports
• 24 DIMM; up to 3TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz
• 3 PCI-E 3.0 x8 slots (2 FH 10.5″ L, 1 LP)
• 2x 10GBase-T, 1 Video, 1 COM/Serial, 5 USB 3.0
Titanium Level • System management: Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with dedicated LAN port
• 1000W Redundant Titanium Level (96%) Power Supplies

Supermicro MicroCloud
Titanium, 96% Efficiency
Power Supplies
12 modular UP Nodes in 3U
NVMe support
 

SYS-5039MS-H12TRF

• 12 modular UP Nodes in 3U; EACH NODE:
• Intel® Xeon® processor E3-1200 v5 family; socket H4 (LGA 1151)
• Up to 64GB UDIMM, up to 2133MHz DDR4 VLP ECC memory support
• Flexible storage options: 2x 3.5″ SATA3 or 4x 2.5″ SATA3 or
2x 2.5″ NVMe + 2x 2.5″ SATA3 or 2x 2.5″ NVMe + 1x 3.5″ SATA3
• Dual GbE ports via Intel i350 GbE LAN controller; Dedicated LAN supports IPMI 2.0, Virtual Media over LAN, and KVM over LAN
• 2000W Redundant Titanium Level high-efficiency Power Supplies

 TwinPro
Titanium, 96% Efficiency
Power Supplies
NVMe support
 

SYS-2028TP-DNCR / SYS-2028TP-DNCTR / SYS-2028TP-DNCFR

• 2 DP nodes in 2U; depth 28.75″, Each Node (x2 nodes):
• Dual Socket R3 (LGA 2011) support: Intel® Xeon® processor
E5-2600 v4/v3 family; QPI up to 9.6GT/s
• 16x DIMM slots; up to 2TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz
• 1 PCI-E 3.0 x16 and 1 PCI-E x8 slots
4 NVMe and 8x 2.5″ Hot-swap SAS3 HDD bays
• 1 InfiniBand port (FDR, 56Gbps), w/ QSFP connector (2028TP-DNCFR)
• 2 GbE (2028TP-DNCR) / 10GBase-T (2028TP-DNCTR), 1 Video, 2 USB 3.0
Titanium Level • System management: Built-in IPMI 2.0, KVM/media over LAN
• 1600W Redundant Titanium Level (96%) Power Supplies

 


10x 2.5″ Drive bays
2x NVMe/SATA3 hybrid ports + 8 SATA3 ports
24 DDR4 DIMM
4x/2x 10GBase-T
2x 10G SFP+
 

SYS-1028U-TNRT+ / SYS-1028U-TNRTP+


• Virtualization Hosting, Cloud Computing, Data Center
• Dual Socket R3 (LGA 2011) support: Intel® Xeon® processor
E5-2600 v4/v3 family; QPI up to 9.6GT/s
• 10x 2.5″ Hot-swap bays; 2 NVMe/SATA3 hybrid + 8 SATA3 ports;
8 SAS3 ports optional via AOC
• 24 DIMM slots; up to 3TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz
• 2 PCI-E 3.0 x16 and 2 PCI-E 3.0 x8 slots (1 LP, 1 internal LP)
• 4x 10GBase-T (1028U-TNR4T+) / 2x 10GBase-T (1028U-TNRT+) /
2x 10G SFP+ (1028U-TNRTP+), 1 Video, 1 COM/Serial, 5 USB 3.0

Titanium Level • System management: Built-in IPMI 2.0, KVM/media over LAN • 750W Redundant Platinum Level Power Supplies


8x 2.5″ SAS3 + 2 SATA3 or Opt. 2 NVMe via AOC
4 GbE LAN
 

SYS-1028UX-CR-LL2

• Optimized for HFT Low-Latency/Low-Jitter applications with
BIOS optimizations
• Pre-installed w/ accelerated dual E5-2687 v3 CPUs and
8x 8GB DDR4 DIMMs (64GB total)
• 8x 2.5″ Hot-swap SAS3 + 2 SATA3 or 2 Optional NVMe via AOC
• 16 DIMM slots; up to 1TB DDR4
• 2 PCI-E 3.0 x16 (FHFL), 2 PCI-E 3.0 x8 (LP, 1 SAS3 integrated)
• 4 GbE, 1 Video, 1 COM/Serial, 5 USB 3.0

Titanium Level • System management: Built-in IPMI 2.0, KVM/media over LAN • Hyper-Speed hardware acceleration technology

 


10x 2.5″ Hot-swap bays
SAS3 via LSI 3108
2x NVMe support
 

SYS-1028R-WC1R / SYS-1028R-WC1RT

• Cloud and other virtualization needs, hosting & application delivery,
database processing & storage, simulation, automation
• Dual Socket Intel® Xeon® processor E5-2600 v4; QPI up to 9.6GT/s
• 10x 2.5″ Hot-swap SAS/SATA HDD Bays;
SAS3 via LSI 3108, 2 Opt. NVMe drive support
• 16 DIMM slots; up to 2TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz
• 2 PCI-E 3.0 x16 (FHHL),1 PCI-E 3.0 x8 Mezzanine for HBA cards
• 2 GbE (1028R-WC1R) / 10GBase-T (1028R-WC1RT)

Titanium Level • System management: Built-in IPMI 2.0, KVM/media over LAN
• 700W/750W Redundant Platinum Level Power Supplies

 
8-Node Rear I/O
6 Hot-swap 2.5″
HDDs per Node
4 SATA3 + 2 NVMe
 

SYS-F618R2-RTN+ / SYS-F618R2-RTPTN+

• FatTwin™ Server; EACH NODE (x8 Hot-plug System Nodes):
• Dual Socket Intel® Xeon® processor E5-2600 v4; QPI up to 9.6GT/s • 6x 2.5″ Hot-swap drive bays: 6 SATA3 or 4 SATA3 + 2x NVMe SSD
• 16 DIMM; up to 2TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz
• 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 Micro LP slot (flexible networking opt.)
• 2 GbE (F618R2-RTN+) / 10GBase-T (F618R2-RTPTN+), 1 Video, 1 COM, 2 USB 3.0

• System management: Built-in IPMI 2.0, KVM/media over LAN
• 2000W Redundant Titanium Level (96%) Power Supplies


4-Node Rear I/O
8 Hot-swap 3.5″
HDDs per 1U
6 SATA3 + 2 NVMe
 

SYS-F628R3-RTBN+ / SYS-F628R3-RTBPTN+

• FatTwin™ Server; EACH NODE (x4 Hot-plug System Nodes):
• Dual Socket Intel® Xeon® processor E5-2600 v4; QPI up to 9.6GT/s
• 8x 3.5″ SATA3 or 6x 3.5″ SATA3 and 2x NVMe Hot-swap drives per U
• 16 DIMM slots; up to 2TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz
• 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 Micro LP slot (flexible networking opt.)
• 2 GbE (F628R3-RTBN+) / 10GBase-T (F628R3-RTBPTN+), 1 Video, 1 COM, 2 USB 3.0
Platinum Level • System management: Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with dedicated LAN port
• 1280W Redundant Platinum Level Power Supplies

 


4-Node Rear I/O
8 Hot-swap 3.5″
HDDs per 1U
6 SAS3 + 2 NVMe
 

SYS-F628R3-RC1B+ / SYS-F628R3-RC1BPT+ / SYS-F628R3-RC0B+ / SYS-F628R3-RC0BPT+

• FatTwin™ Server; EACH NODE (x4 Hot-plug System Nodes):
• Dual Socket Intel® Xeon® processor E5-2600 v4; QPI up to 9.6GT/s • 8x 3.5″ Hot-swap drive bays: 8 SAS3 or 6 SAS3 + 2 NVMe SSD
SAS3 (12Gbps) support via LSI 3108 (“C1”) / LSI 3008 (“C0”)
• 16 DIMM; up to 2TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz
• 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 Micro LP slot (flexible networking opt.)
• 2 GbE/10GBase-T (“PT+”), 1 Video, 1 COM, 2 USB 3.0
Platinum Level • System management: Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with dedicated LAN port
• 1280W Redundant Platinum Level Power Supplies