Características Destacadas

  1. Dual Socket P (LGA 3647) support 2nd Gen. Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
  2. 24 DIMMs; up to 6TB 3DS ECC DDR4-2933MHz RDIMM, Supports Intel® Optane™ DCPMM††
  3. 2 PCI-E 3.0 x16 Low-profile slots
  4. Dual Drawer/Tray with a total of 32 NVMe 2.5″ SSDs
  5. 2x 10GBase-T LAN ports
  6. Built in Intel QAT for Crypto/Compression
  7. 8x 40x56mm PWM fans
  8. 1600W Redundant Power Supplies  Platinum Level

Características Técnicas

Product SKUs
SYS-1029P-N32R
  • SuperServer 1029P-N32R (Black)
Motherboard
Super X11DPS-RE
Processor/Cache
CPU
  • Dual Socket P (LGA 3647)
  • 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    3 UPI up to 10.4GT/s
  • Support CPU TDP up to 140W
Cores
  • Up to 22 Cores
Note BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
System Memory
Memory Capacity
  • 24 DIMM slots
  • Up to 6TB 3DS ECC DDR4-2933MHz RDIMM
  • Supports Intel® Optane™ DCPMM††
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM
Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset
  • Intel® C627 chipset
Network Connectivity
  • Intel® X550 Dual Port 10GBase-T
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • ASPEED AST2500 BMC
Input / Output
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
Video
  • 1 VGA port
Serial Header
  • 1 COM port (header)
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
Management
Software
Power Configurations
  • ACPI / APM Power Management
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-136HTS-R1K69P-U2
Dimensions and Weight
Height
  • 1.7″ (43mm)
Width
  • 17.26″ (438mm)
Depth
  • 35.95″ (913mm)
Weight
  • Net Weight: 58 lbs (26.3kg)
  • Gross Weight: 93 lbs (42.2kg)
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power LED
  • Hard drive activity LED
  • Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
Expansion Slots
PCI-Express
  • 2 PCI-E 3.0 x16 Low-profile slots
M.2
  • M.2 Interface: 2 PCI-E 3.0 x2, RAID 0, 1
  • M.2 Form Factor: 2260/2280/22110
  • M.2 Key: M-Key
Drive Bays
Hot-swap
  • Dual Drawer/Tray with a total of 32 NVMe 2.5″ SSDs
System Cooling
Fans
  • 8x 40x56mm PWM fans
AC/DC240V Input Redundant Power Supply
1000 / 1600W 1U Redundant Power Supply
Total Output Power
  • 1000W / 1600W
Dimension
(W x H x L)
  • 73.5 x 40 x 185 mm
Input
  • 100 — 127Vac / 13.8A / 47-63Hz
  • 200 — 240Vac / 9.6A / 47-63Hz
  • 200 — 240Vdc / 8.5A (CCC Only)
+12V
  • Max: 83A / Min: 0A (1000W)
  • Max: 132A / Min: 0A (1600W)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • Gold Finger
Certification Platinum Level Certified   Platinum Certified
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 30°C (50°F ~ 86°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)