SYS-1029P-N32R

Características Destacadas

1. Dual Socket P (LGA 3647) support 2nd Gen. Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
2. 24 DIMMs; up to 6TB 3DS ECC DDR4-2933MHz^† RDIMM, Supports Intel® Optane™ DCPMM^††
3. 2 PCI-E 3.0 x16 Low-profile slots
4. Dual Drawer/Tray with a total of 32 NVMe 2.5″ SSDs
5. 2x 10GBase-T LAN ports
6. Built in Intel QAT for Crypto/Compression
7. 8x 40x56mm PWM fans
8. 1600W Redundant Power Supplies  Platinum Level

Características Técnicas

Product SKUs SYS-1029P-N32R SuperServer 1029P-N32R (Black) Motherboard Super X11DPS-RE Processor/Cache CPU Dual Socket P (LGA 3647) 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)‡, 3 UPI up to 10.4GT/s Support CPU TDP up to 140W Cores Up to 22 Cores Note ‡ BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors System Memory Memory Capacity 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM Supports Intel® Optane™ DCPMM†† Memory Type 2933†/2666/2400/2133MHz ECC DDR4 RDIMM Note † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. On-Board Devices Chipset Intel® C627 chipset Network Connectivity Intel® X550 Dual Port 10GBase-T IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Graphics ASPEED AST2500 BMC Input / Output LAN 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port USB 2 USB 3.0 ports (rear) Video 1 VGA port Serial Header 1 COM port (header) System BIOS BIOS Type AMI 32Mb SPI Flash ROM Management Software Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5 Watch Dog Power Configurations ACPI / APM Power Management PC Health Monitoring CPU Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator FAN Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment Thermal Control for fan connectors Chassis Form Factor 1U Rackmount Model CSE-136HTS-R1K69P-U2 Dimensions and Weight Height 1.7″ (43mm) Width 17.26″ (438mm) Depth 35.95″ (913mm) Weight Net Weight: 58 lbs (26.3kg) Gross Weight: 93 lbs (42.2kg) Front Panel Buttons Power On/Off button UID button LEDs Power LED Hard drive activity LED Network activity LEDs System Overheat LED / Fan fail LED / UID LED Expansion Slots PCI-Express 2 PCI-E 3.0 x16 Low-profile slots M.2 M.2 Interface: 2 PCI-E 3.0 x2, RAID 0, 1 M.2 Form Factor: 2260/2280/22110 M.2 Key: M-Key Drive Bays Hot-swap Dual Drawer/Tray with a total of 32 NVMe 2.5″ SSDs System Cooling Fans 8x 40x56mm PWM fans AC/DC240V Input Redundant Power Supply 1000 / 1600W 1U Redundant Power Supply Total Output Power 1000W / 1600W Dimension (W x H x L) 73.5 x 40 x 185 mm Input 100 — 127Vac / 13.8A / 47-63Hz 200 — 240Vac / 9.6A / 47-63Hz 200 — 240Vdc / 8.5A (CCC Only) +12V Max: 83A / Min: 0A (1000W) Max: 132A / Min: 0A (1600W) 12Vsb Max: 2.1A / Min: 0A Output Type Gold Finger Certification   Platinum Certified Operating Environment RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°C ~ 30°C (50°F ~ 86°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)