SYS-2029UZ-TN20R25M

Características Destacadas

  1. Dual Socket P (LGA 3647) compatible con procesadores escalables Intel® Xeon® de 2.a generación (Cascade Lake / Skylake)
  2. 24 DIMM; hasta 6TB 3DS ECC DDR4-2933MHz RDIMM / LRDIMM, compatible con Intel® Optane ™ DCPMM
  3. 1 PCI-E 3.0 x8 ranuras (LP)
  4. 2x 25G SFP28 puertos Ethernet
  5. 24 compartimientos de unidades de 2.5 hot-swap; 20 NVMe + 4 SAS3 / SATA; 1 Puerto M.2 NVMe, puertos M.2 NVMe y SATA3 adicionales opcionales
  6. 4 Ventiladores de 8 cm de alta resistencia
  7. Fuentes de alimentación redundantes de 1600 W Nivel de titanio (96%)

Características Técnicas

Producto SKU Chassis
SYS-1029UZ-TN20R25M SuperServer 1029UZ-TN20R25M Formato 1U Rackmount
Placa Base Modelo CSE-116UTQ20-R1K62-T
Super X11DPU-ZE+ Tamaño y Peso
Procesador / Cache Altura 43mm
CPU Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Ancho 437mm
Cores Hasta 28 cores Profundidad 706mm
Memoria del Sistema Peso total 21.8kg
Capacidad 24 DIMM slots
Hasta 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Compatible con Intel® Optane™ DCPMM
Panel Frontal
Tipo 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM Botones Power On/Off button
System UID button
On-Board Devices LEDs Power LED
Hard drive activity LED
Network activity LEDs
UID LED
Chipset Intel® C621 chipset Ranuras de Expansión
SATA SATA3 (6Gbps); RAID 0, 1, 5, 10 PCI-Express 2 PCI-E 3.0 x8 slots (FH, FL).

For 20 NVMe configuration, only 1 PCI-E 3.0 x8 is available.

For 18 NVMe configuration, 2 PCI-E 3.0 x8 will be available

Conectividad Network 2 25GbE SFP28 ports via AOC-URN4-M2TS (Mellanox ConnectX-4 Lx EN) Drive Bays / Almacenamiento
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Hot-swap 20 Hot-swap 2.5″ 7mm drive bays
20 NVMe (CPU1: 8 NVMe + 2 NVMe/SAS/SATA3 hybrid ports, CPU2: 10 NVMe ports)
Graphics ASPEED AST2500 BMC M.2 1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110)
1 M.2 M-Key SATA3 via optional cable CBL-SAST-0538 and plastic stand-off FST-SCRW-0074L (2240/2260/2280/22110)
2 M.2 PCI-E 3.0 x4 M-Key NVMe via optional add-on card AOC-SLG3-2M2 (2260/2280/22110)
Input / Output Sistema de Refrigeración
NVMe 8 NVMe ports + 2 SAS/SATA3/NVMe Hybrid Ports (from CPU 1)
10 NVMe ports (from CPU 2)
Ventiladores 8 ventiladores de servicio pesado con control óptimo de la velocidad del ventilador
LAN 2 25GbE SFP28 ports
1 RJ45 Dedicated IPMI LAN port
Air Shroud 2 Air Shroud
USB 3 USB 3.0 ports
(2 rear, 1 Type A)
2 USB 2.0 ports(front)
Fuentes de alimentación
Video 1 VGA port 1600W Redundant Power Supplies with PMBus
Serial Port 1 Serial header Total Output Power 1600W/1000W
DOM 2 SuperDOM (Disk on Module) ports Tamaño 73.5 x 40 x 203 mm
System BIOS Input 100-127Vac / 13 – 9A / 50-60Hz
200-240Vac / 10 – 8A / 50-60Hz
Tipo BIOS AMI 32Mb SPI Flash ROM +12V Max: 83.3A / Min: 0A (100-127Vac)
Max: 133A / Min: 0A (200-240Vac)
Gestión 12Vsb Max: 2.1A / Min: 0A
Software Intel® Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SSM, SPM, SUM
SuperDoctor® 5
WatchDog
Output Type 25 Pairs Gold Finger Connector
Power Configurations ACPI Power Management Certificaciones Titanium Level96%Titanium Level
PC Health Monitoring Operating Environment
PCU Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator
RoHS RoHS Compliant
FAN Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Environmetal Spec.Operating Temperature:
10°C ~ 35°C
Non-operating Temperature:
-40°C to 60°C
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Temperatura Monitoring for CPU and chassis environment
Thermal Control for fan connectors

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “SYS-2029UZ-TN20R25M”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *